High Hardness Tungsten Carbide Saw Tips For Stainless Steel , Ym6a
, Ym3x , Wc , Cobalt
1. Advantages
1. Over 10 Years' efforts in making high quality tungsten carbide
products.
2. Rich experience in grade researching, mould designing, automatic
press, HIP sintered, surface treating and quality control.
3. We use 100% raw material to produce tungsten carbide products.
4. It is with high hardness, good wear resistance and high
toughness.
5. We can offer any size tungsten carbide products.
6. We produce the product according to your requirements.
7. Good quality with competitive price.
8. The best and reliable after service.
High Hardness Tungsten Carbide Saw Tips For Stainless Steel , Ym6a
, Ym3x , Wc , Cobalt
Grades,properties and application of tungsten carbide saw tips
Tungsten carbide saw tips,tungsten carbide saw
tips,YM6A,YM3X,WC,Cobalt
| Grade | ISO | Density g/cm3 | Hardness HRA | T.R.S N/mm2 |
Application |
| YM3A | K01 | 15.1 | 94.0 | ≥1700 |
Shaving board, laminated board and HDF etc. |
| YM3X | K05 | 15.2 | 92.0 | ≥1800 |
| YM6A | K10 | 14.85 | 92.5 | 2200 |
Hardwood, MDF, HDF, copper and aluminum. |
| YM6X | K10 | 14.9 | 91.5 | 2300 |
Common wood, PVC, copper and aluminum. |
| YM8X | K20 | 14.65 | 91.5 | 2900 |
Carbon steel, copper and aluminum. |
| YM10X | K30 | 14.45 | 90.5 | 3000 |
Cork and building templates. |
| YM10T | K30 | 14.4 | 91.8 | 3400 |
All kinds of wood, copper, aluminum and other non-ferrous metals,
highly optimized for general use. |
| YM2T | K30 | 14.3 | 92.2 | 2500 |
Stainless steel, color steel plate, etc. |
| YM6 | K10 | 14.9 | 90.5 | 2400 | Hard wood, original wood, aluminum section bar, brass rod and cast
iron. |
| YM8 | K20 | 14.7 | 89.8 | 2800 |
Dry wood, soft wood, aluminum and brass, graphite and grass. |
| YM8C | K20 | 14.7 | 88.5 | 2600 |
Soft and dry wood, general wood with loose knot, man-made marble.
Ceramics and grass. |
| YM9C | K20-K30 | 14.6 | 88.0 | 2700 |
For debarking and cutting of frozen wood, soft wood and original
wood. |
| YM11C | K30-K40 | 14.4 | 87.0 | 2700 |
Hard wood, non-ferrous metal, granite and marble. |
| YM15C | K40 | 14.0 | 86.0 | 3100 |
For debarking and cutting of frozen wood, soft wood and original
wood. |
| MR501 | P30 | 12.5 | 92.5 | ≥2000 |
Steel tile, steel angle, sheet iron. |
| MR503 | P30 | 12.3 | 92.0 | ≥1900 |
Steel tile, steel angle, sheet iron. |
